Pitney Bowes F731 Operator's Manual page 48

3 • Programming
3-12
Paper/DF
Paper
Booklet
Booklet/RM This function is not used in scanning mode.
Paper/DF+
Press Green to confirm your selection. The display shows the material
loading orientation selection:
019> Loading orientation : 3.DOWN-BOTTOM
<-->=SELECT
Use the Arrow Buttons to select the material loading orientation:
1
2
3
4
Press Green to confirm your selection. The display requests the scanning
version:
019> Vers.: BCR Standard
<-->=SELECT
Use the Arrow Buttons to select which scanning mode you want. In this
example, select 'BCR Standard'. Press Green to confirm.
The display will now ask where the BCR Scanner is located:
Sheets with double detect turned ON (default setting).
This will be the most common setting for sheets.
Sheets with the double detect turned OFF. This is not
recommended as the feeder will not sense double
feeds. Select this mode for material (sheets) above
160 g/m (42 lb).
2
This function is not used in scanning mode.
Sheets with double detect turned on at a custom
setting. This is normally used for sheets with
heavily printed block areas and will be used only on
advice from your service representative.
Green=CONFIRM
Face up, bottom first
Face up, top first
Face down, bottom first
Face down, top first
Green=CONFIRM
Blue=EXIT
Blue=EXIT
SDC790A