2 • Operation
F731 Universal
Feeder Setup
Accumulator
Input Frame
Position
Accumulator
Ramp Height
2-2
This section explains how to select a program and set the F731 for the
material being run:
NOTE:
A support latch will engage each
time the Top Cover is opened.
It is necessary to manually release
this latch in order to close the Top
Cover.
Lower the F731 Front Cover.
Set lever d to the required position:
3
for sheets
2
for thin booklets up to
2.5mm (3/32") thick
1
for thick booklets up to
4mm (5/32") thick
Close the Front Cover.
Open the Top Cover.
The ramp must be set to the raised position for sheets or the lowered
position for booklets. Simply grasp the ramp and set it to the required
position.
Raised for sheets
Lowered for booklets
SDC790A