Service; Compliance - Pitney Bowes F731 Operator's Manual

5 • Reference

Service

Compliance

5-2
Service for your system is available throughout the world.
Should you have questions about your system, or require service or
assistance with your particular application, please call your machine
supplier. Contact details are given at the front of this book or in a separate
document supplied with your system.
Your machine supplier will also offer a service maintenance contract to keep
your system in top condition at nominal cost.
Conforms to the Following:
FCC Rules
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause interference
to radio communications. Operation of this equipment in a residential area is
likely to cause interference, in which case the user will be required to correct
the interference at his own expense.
CAUTION: Changes or modifications to this equipment not expressly
approved by the party responsible for compliance could void the user's
authority to operate the equipment.
It is certified that the system complies with all applicable Directives
of the European Union.
For a formal Declaration of Conformity please contact Compliance
Engineering. Contact information is given in the front of this guide or on a
separate document supplied with your system.
WARNING: This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures.
SDC790A