A Note To The Operator; About Your System; The F731 Universal Feeder - Pitney Bowes F731 Operator's Manual

1 • Introduction
A note to the
Operator
About Your
System
The F731
Universal Feeder
1-4
These instructions explain how to setup and use the Model F731 Universal
Feeder and the optional Model F734/F735 High Capacity Loader. Please
spend a few moments reading through them; understanding what the
system does and how it does it will keep problems to a minimum and help
you get the best performance from it and the DI900/DI950 inserting system
of which it is a part.
Before setting up and using the system, you should be thoroughly familiar
with its controls, programming options and setup procedure. You should also
be thoroughly familiar with each component of the DI900/DI950 system (see
the DI900/DI950 Operator Guide supplied with the system).
The F731 is used as part of the Pitney Bowes DI900/DI950 Inserting
System. It takes laser printed, or pre-printed cut sheet forms and efficiently
collates them into customer sets. It can also feed single booklets up to 4mm
(0.16") thick. OMR/BCR/OCR/2D Matrix scanning ensures complete integrity
and confidentiality of the sets.
Standard Features
The F731 offers an impressive array of standard features. Among them:
• Bottom feeding of material
• Variable speed control
• Overcount control
• Automatic double document detection
• Job storage - up to 99 jobs available
• Multi-function operator controls
• Easy to use self prompting display
• Out of material and jam detection
• Resettable sheet counter
• Batch count control
• Operator selectable scan line increments: 1/6", 1/8", 1/10" and
'User Definable' (if OMR scanning is fitted)
SDC790A