Handling Material Stoppages; Stoppages In The F731 Universal Feeder - Pitney Bowes F731 Operator's Manual

Handling
Material
Stoppages
Stoppages in the
F731 Universal
Feeder
SDC790A
This section describes how to clear material stoppages from the F734/F735
High Capacity Loader and the F731 Universal Feeder.
The F731 may stop indicating a misfeed. The indicator on the Stop/Clear
Deck (Red) button will be flashing.
Follow the relevant procedure below:
Feeder Head section...
Remove the material from the Feed Deck.
Open the Top Cover. Unlock lever a and turn knob b fully clockwise and lock
lever a to keep the separator area open.
Carefully clear any material in this
area.
Unlock lever a, turn knob b
anticlockwise as far as it will go and
lock lever a to secure the assembly
closed.
Close the Top Cover, reload the paper
and press Run Confirm (Green) to
restart operation.
Accumulator Area...
Open the Top Cover.
Carefully clear any stalled material,
taking care not to damage the
accumulator drive O rings.
Close the Top Cover.
Press Run Confirm (Green) to restart
operation.
TIP:
If you are running stiff material, it may aid removal if the Accumulator Ramp
e is moved out of the way. Make sure you return the ramp to its original
position after clearing the stoppage.
Troubleshooting & Maintenance • 4
4-3