Pitney Bowes F731 Operator's Manual page 46

3 • Programming
3-10
You now need to tell the system in which direction to read the scan code:
018> OMR scanning : NORMAL
<-->=SELECT
The options available are:
NORMAL
REVERSE
Use the Arrow Buttons to select the option you want, then press Green to
confirm.
NOTE:
Take into account the direction of feed of your material when making this
setting. i.e. whether the material is being fed top first or bottom first. The
setting selected must match whether the Bench Mark is fed past the scanner
first or last.
The display will return to the program listing display.
Programming an OMR scanning job is now complete.
Green=CONFIRM
Where the system will expect the Bench Mark to be
the FIRST mark in the scan code.
Where the system will expect the Bench Mark to be
the LAST mark in the scan code.
Blue=EXIT
SDC790A