Table of Contents
Advertisement
Power Up
SDC790A
NOTE:
If the reverse accumulator kit is fitted
to your machine, the ramp height
has three settings controlled by the
position of the lever f located inside
the Front Cover:
1
for reverse accumulate of sheets
i.e. sheet order ...3, 2, 1,
2
for booklets
3
for forward accumulate of sheets
i.e. sheet order 1, 2, 3....
Before turning the system ON, refer to the Important Safety Notes on
page 1-2.
Turn the F731 Main Power Switch ON. The F731 will momentarily display
the version number of the software, and then show the listing of available
programs. The Exit (Blue) indicator will light.
Program Listing
012: JOB1
013: JOB2
HINT:
If nothing happens, turn the Main Power Switch OFF. Make sure all covers
are closed, then turn the Main Power Switch ON again.
PAPER/DF C=1
PAPER/DF C=1
Operation • 2
<PROG
USB
USB indicates that
the USB link to the
DI900/DI950 Inserter
is operational.
2-3
Advertisement
Table of Contents
Troubleshooting
