Pitney Bowes F731 Operator's Manual page 39

SDC790A
Press the Green button to confirm each character.
When the name is complete, press Red to continue. The display shows the
material selection screen:
017> Material: PAPER/DF
<-->=SELECT
Use the Arrow Buttons to select the material for this job:
Paper/DF
Paper
Booklet
Booklet/RM Booklets with separator motor turned ON. This is
Paper/DF+
Press Green to confirm your selection. The display shows the material
loading orientation selection:
017> Loading orientation : 3.DOWN-BOTTOM
<-->=SELECT
Use the Arrow Buttons to select the material loading orientation:
1
2
3
4
Press Green to confirm your selection. The display shows the counter
selection:
Green=CONFIRM
Sheets with double detect turned ON (default setting).
This will be the most common setting for sheets.
Sheets with the double detect turned OFF. This is not
recommended as the feeder will not sense double
feeds. Select this mode for material (sheets) above
160g/m (42 lb).
2
Booklets with separator motor turned OFF. This is the
normal mode for booklets. Double Detect is disabled
with this mode.
used for special applications. Double Detect is
disabled with this mode.
Sheets with double detect turned on at a custom
setting. This is normally used for sheets with
heavily printed block areas and will be used only on
advice from your service representative.
Green=CONFIRM
Face up, bottom first
Face up, top first
Face down, bottom first
Face down, top first
Programming • 3
Blue=EXIT
Blue=EXIT
3-3