Pitney Bowes F731 Operator's Manual page 25

Operation • 2
Top Scanning
Connect power and turn ON. Open the Top Cover.
Open the separator. Unlock lever
a, turn knob b clockwise as far as
it will go and hold in position while
locking lever a.
Slide a sheet under the separator
and observe the scanner beam on
the sheet.
Adjust the scanner side to side
until the beam is centred on the
scan marks. Loosen the knurled
knob shown, align the scanner and
retighten the knob.
Close the cover.
SDC790A
2-7