Pitney Bowes F731 Operator's Manual page 57

SDC790A
Problem
Feeder display
indicates 'Wrong
Input Frame
Position'.
Feeder display
indicates 'Misfeed
on Conveyor'.
Feeder display
indicates 'Scan
System Error'.
F734/F735 will not
go into automatic
mode.
Troubleshooting & Maintenance • 4
Possible Cause
Check the position of the Input Frame (see page
2-2).
Check the Accumulator Side Guides settings (see
page 2-12).
Check to ensure that the green accumulator belts
are properly installed on all pulleys.
Scanner not positioned correctly above/below the
scan marks (see pages 2-6 and 2-7 for OMR, or
pages 2-8 and 2-9 for BCR).
Scan head may be blocked or dusty. Clean scan
head surface with a soft cloth.
Check that the Input Sensor is properly installed
(see page 2-14).
Check Exit Area Cover is closed.
4-7