3 • Programming
3-4
017>
Counter : 01 Sheets
<-->=VALUE
Setting a count tells the feeder how many sheets are in each collated set.
The F731 will collate the requested number of forms before transporting
them into the DI900/DI950 system. The default setting is 01 – a single sheet
insert (one piece per cycle). The count can be set from 01 to 25.
a. Use the Arrow Buttons until the first number of your entry appears,
then press Green to enter the number.
b. Repeat this process for the second digit.
The display will return to the program listing display.
Programming a non-scanning job is now complete.
Green=CONFIRM
Red=GO ON
SDC790A