2 • Operation
Setting the
Material Guide
Fingers
2-10
Open the Top Cover.
The guide fingers can be raised or lowered into one of three detented
positions, depending on the material being run:
Lowered for sheets.
Mid position for thin booklets of
approx. 2.5mm (3/32") thickness.
Raised for thick booklets up to
4mm (5/32") thickness.
Loosen the knurled locking knobs and adjust the guide fingers side to side
to control material. If bottom scanning is being used, one of the guide fingers
must be positioned directly above the scanning head to control the material
as it is scanned.
Close the cover.
SDC790A