Attach Crow Ladder Grip - KidKraft Cedar Summit Lookout Extreme Installation And Operating Instructions Manual

Step 55: Attach Crow Ladder Grip
A: Position Crow Ladder Grip with one end on the outside of the Nest Ladder and the opposite end on the outside
of the (045) Ladder Side Joist. Pre-drill holes using a 1/8" drill bit then attach using 2 (WL3) 1/4 x 1-3/8" Wafer
Lags (with flat washer). (Fig. 55.1)
WL3
Crow Ladder
Grip
Nest Ladder
Fig. 55.1
Ladder Side
Joist
1/4" Flat
Washer
Hardware
2 x 1/4 x 1-3/8" Wafer Lag
WL3
(1/4" flat washer)
99
Other Parts
1 x Crow Ladder Grip