Access Ladder Assembly - KidKraft Summerhill F29050 Installation And Operating Instructions Manual

Step 13: Access Ladder Assembly
Part 1
A: Insert 3 (1578) Dowels into (2846) Ladder Rail Right and (2845) Ladder Rail Left, as shown in fig. 13.1.
Making sure that the holes in both rails are at the top, facing outwards.
B: Make sure shoulder of dowel is against each rail before pre-drilling pilot holes. Drill 1/8"(3.2mm) pilot holes
through the rails and into the dowels to prevent splitting. (fig. 13.2)
C: Attach (1578) Dowels to both rails with 2 (S3) #8 x 2-1/2" Wood Screws per dowel. (fig. 13.3 and 13.4)
Fig. 13.1
Pre-drill 1/8" pilot holes through
Dowels to prevent splitting.
Pre-drill 1/8"(3.2mm)
Then fasten the screws to
Pre-drill 1/8" pilot holes through pilot holes through
secure the Dowels. Check that
Dowels to prevent splitting.
screw has properly secured the
Then fasten the screws to
dowel.
secure the Dowels. Check that
screw has properly secured the
Pre-drill 1/8" pilot holes through
dowel.
Dowels to prevent splitting.
Then fasten the screws to
secure the Dowels. Check that
6X #8 x 1-1/2" WS
screw has properly secured the
dowel.
6X #8 x 1-1/2" WS
Fig. 13.3
6X #8 x 1-1/2" WS
Wood Parts
3 x Dowel 28.6 x 403.2mm
1578
1 x Ladder Rail Left 34.9 x 63.5 x 1310.5mm
2845
1 x Ladder Rail Right 34.9 x 63.5 x 1310.5mm
2846
1578
S3
1578
1578
Hardware
6 x #8 x 2-1/2" Wood Screw
S3
Warning Make sure
shoulder is against
Post before drilling
pilot holes.
Warning Make sure
shoulder is against
Post before drilling
Fig. 13.2
pilot holes.
Warning Make sure
shoulder is against
Post before drilling
pilot holes.
1578
S3
35
2846
2845
Fig. 13.4
S3