Wall Mounting And Control Panel Installation - ProMinent DULCOMETER Assembly And Operating Instructions Manual

6.3.4

Wall mounting and control panel installation

Seals and terminal diagram
Select the correctly fitting seals for the controller's cable openings. Seal the open
holes with blanking plugs. This is the only way to ensure an acceptable air-tightness.
Moisture in the controller can lead to operational abnormalities.
Note the instructions on the terminal diagrams provided.
Sets, mounting fittings, part number 1045171, contains the following components
Description
Seal (M 20 x 1.5), 4xØ5
Seal (M 20 x 1.5), 2xØ4
Seal (M 20 x 1.5), 2xØ6
Sealing stopper, Ø10, polyamide, grey RAL 7035
Protective plug, IL4-073
Plug, IL4-044
Threaded cable connector (M 20 x 1.5) (5-13), polya‐
mide, black
Threaded cable connector (M 12 x 1.5) (4-6), black
Counter-nut (M 12 x 1.5), width across flats 15), brass,
nickel-plated
Ensure that the cable is not under tension.
1. Loosen the four housing screws
Assembly and installation
Part number
1045172
1045173
1045194
1042417
140448
140412
1040788
1009734
1018314
Quan‐
tity
2
2
2
5
5
5
1
1
1
43