Wall Mounting And Control Panel Installation - ProMinent DULCOMETER Assembly And Operating Instructions Manual

Mounting and installation
6.3.4

Wall mounting and control panel installation

Seals and terminal diagram
Select suitable seals to match the cable penetrations of the controller. Close open
holes with blanking plugs. It is only in this way that sufficient sealing is ensured.
Observe the instructions on the enclosed terminal plans.
Kit, fitting accessories, part number 1045171, includes the following individual parts
Description
Sealing ring (M 20 x 1.5), 4xØ5
Sealing ring (M 20 x 1.5), 2xØ4
Sealing ring (M 20 x 1.5), 2xØ6
Sealing stopper, Ø10, polyamide, grey RAL 7035
Protective plug, IL4-073
Plug, IL4-044
Cable threaded connector (M 20 x 1.5) (5-13), polya‐
mide, black
SKINTOP threaded connector (M 12 x 1.5), (4-6),
®
black
Counter nut (M 12 x 1.5), 15 mm AF, brass, nickel
plated
The cable must be routed in a site-provided cable duct to ensure strain relief
1. Undo the four housing screws
2. Slightly lift the controller housing top section forwards and plug the housing top
section in the park position in the housing bottom section.
40
Part number
1045172
1045173
1045194
1042417
140448
140412
1040788
1009734
1018314
Quan‐
tity
2
2
2
5
5
5
1
1
1