Modifying Table Rows; Deleting Table Rows - AudioCodes Mediant 800 User Manual

CHAPTER 6 Web-Based Management
The table (e.g., IP Groups table) and dialog box in which the Add new option was selected
is minimized to the bottom-left corner of the Web interface and a dialog box appears for
adding a new row in the referenced-table (e.g., Proxy Sets table).
b. Configure the referenced-row and click Apply; the referenced-table (e.g., Proxy Sets
table) closes and you are returned to the dialog box in which you selected the Add new
option (e.g., IP Groups table), where the newly added row now appears selected.
You may want to access the referenced-table (e.g., Proxy Sets table) to simply view all its
configured rows and their settings, without selecting one. To do this, click the View button. To
return to the dialog box of the table (e.g., IP Groups table) in which you are making your
configuration, click the arrow

Modifying Table Rows

The following procedure describes how to modify (edit) the configuration of an existing table row.
Remember that a gray-colored dot icon displayed next to a parameter's value (as shown in the
example below), indicates that it was changed from its default value:
➢
To edit a table row:
1. Select the row that you want to edit.
2. Click the Edit
current configuration settings of the row.
3. Make your changes as desired, and then click Apply; the dialog box closes and your new
settings are applied.
4. If the Save
flash memory, otherwise they are discarded if the device resets (without a save to flash) or
powers off.

Deleting Table Rows

The following procedure describes how to delete a row from a table.
➢
To delete a table row:
1. Select the row that you want to delete.
2. Click the delete
requesting you to confirm deletion, as shown in the example below:
icon on the minimized dialog box to restore it to its previous size.
button, located on the table's toolbar; a dialog appears displaying the
button is surrounded by a red border, you must save your settings to
icon, located on the table's toolbar; a confirmation message box appears
- 28 -
Mediant 800 Gateway & E-SBC | User's Manual