Table of Contents
Advertisement
WIPER PARK SWITCH SHORTED TO GROUND —
TEST
3
Disconnect the Junction Block harness connector.
Disconnect the Wiper Switch connector.
Measure the resistance of the Wiper Switch MUX Circuit.
Is the resistance below 5.0 ohms?
Yes → Replace the Wiper Switch.
→ Replace the Body Control Module.
No
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
WINDSHIELD WIPER & WASHER
Continued
461
APPLICABILITY
All
Advertisement
Table of Contents
