Table of Contents
Advertisement
*HIGH BEAM INDICATOR ALWAYS ON —
TEST
4
Turn the ignition off.
Disconnect the Junction Block C6 harness connector.
Turn the ignition on.
Measure the voltage between the #3 Fuse in the Junction Block and ground.
Is there any voltage present?
Yes → Replace the Junction Block in accordance with the Service Infor-
→ Replace the Body Control Module in accordance with the Service
No
ACTION
mation.
Perform BODY VERIFICATION TEST - VER 1.
Information.
Perform BODY VERIFICATION TEST - VER 1.
INSTRUMENT CLUSTER
Continued
373
APPLICABILITY
All
Advertisement
Table of Contents
