Chrysler Sebring 2004 Service Manual page 2803

ELECTRICALLY HEATED SYSTEMS
*REAR WINDOW DEFOGGER INOPERATIVE (EQUIPPED WITH AUTO -
MATIC TEMP CONTROL) —
TEST
10 Remove the Rear Window Defogger Relay from the Junction Block.
Install a known good relay in the Rear Window Defogger Relay connector.
Turn the ignition on.
With the DRBlll , actuate the Rear Window Defogger Relay.
Examine the Rear Window Defogger Relay.
Does the Rear Window Defogger Relay click while actuating.
Yes → Replace the original Rear Window Defogger Relay.
→ Go To 11
No
11 Remove the BCM from the junction block.
Reinstall the Rear Window Defogger Relay if removed.
Turn the ignition on.
Momentarily jumper the Rear Window Defogger Relay Control circuit (cavity 3) in
the BCM internal connector to ground.
Does the relay click?
Yes → Replace the Body Control Module.
→ Replace the Junction Block.
No
Continued
ACTION
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
254
APPLICABILITY
All
All