A/C HEAD, EBL INPUT SHORTED TO BATTERY - MTC —
TEST
3
NOTE: Make sure that the A/C - Heater Control C1 harness connector is
connected to the A/C - Heater Control.
Turn the ignition on.
With the DRBIII , record and erase Body Computer DTC's.
With the DRBIII , read Body Computer DTCs.
Does the DRBIII display: A/C Head, EBL Input Shorted To Batt?
Yes → Replace the A/C - Heater Control in accordance with the Service
No
ACTION
Information.
Calibration must be performed after repair/replacement is com-
pleted.
Perform BODY VERIFICATION TEST - VER 1.
→ Using the wiring diagram/schematic as a guide, inspect the
wiring and connectors for conditions causing an intermittent
short.
Calibration must be performed after repair/replacement is com-
pleted.
Perform BODY VERIFICATION TEST - VER 1.
271
HEATING & A/C
Continued
APPLICABILITY
All