INSTRUMENT CLUSTER
FUEL LEVEL SENDING UNIT FAILURE —
TEST
7
Turn the ignition off.
Disconnect the Fuel Tank Module harness connector.
Measure the resistance of the Fuel Level Sensor.
The Fuel Level Sensor resistance must be within the following values:
Full = Approximately 130 Ohms
3/4 = Approximately 340 Ohms
1/2 = Approximately 550 Ohms
1/4 = Approximately 760 Ohms
Empty = Approximately 940 Ohms
Does the Fuel Level Sensor resistance measure within specifications?
Yes → Replace the Body Control Module in accordance with the Service
→ Replace the Fuel Level Sensor in accordance with the Service
No
ACTION
Information.
Perform BODY VERIFICATION TEST - VER 1.
Information..
Perform BODY VERIFICATION TEST - VER 1.
Continued
358
APPLICABILITY
All