Table of Contents
Advertisement
Symptom:
*TRANSMISSION SIMULATOR 8333 WILL NOT POWER UP
TRANSMISSION SIMULATOR WILL NOT POWER UP
TEST
1
NOTE: Make sure to check for any Transmission Control Relay DTCs. or
conditions. A stuck open Transmission Control Relay can cause the Trans-
mission Simulator to not Power up.
NOTE: If the Transmission Simulator, Miller tool #8333 and the Electronic
Transmission Adapter kit 8333-1A will not power up make sure to check all
connectors and the ground cable for proper installation.
If there are no possible causes remaining, view repair.
Repair
POSSIBLE CAUSES
ACTION
Check and repair these symptoms before having the Transmission
Simulator repaired.
TRANSMISSION - NGC
315
APPLICABILITY
All
Advertisement
Table of Contents
