*TRACTION CONTROL INDICATOR INOPERATIVE —
TEST
4
Turn the ignition off.
Disconnect the Traction Control Switch harness connector.
Disconnect the Instrument Cluster harness connector.
Measure the resistance of the Traction Control Switch Sense circuit between the
Traction Control Switch connector and the Instrument Cluster connector.
Is the resistance below 5.0 ohms?
Yes → Replace the Instrument Cluster in accordance with the Service
→ Repair the Traction Control Switch Sense circuit for an open.
No
ACTION
Information.
Perform BODY VERIFICATION TEST - VER 1.
Perform BODY VERIFICATION TEST - VER 1.
INSTRUMENT CLUSTER
389
Continued
APPLICABILITY
All