Chrysler Sebring 2004 Service Manual page 2766

*NO RESPONSE FROM PCM (SCI ONLY) - SBEC —
TEST
9 Turn the ignition off.
Disconnect the PCM harness connector.
Disconnect the DRB from the DLC.
Measure the resistance of the SCI Transmit circuit between the PCM connector and
the DLC.
Is the resistance below 5.0 ohms?
Yes → Go To 10
No
10 If there are no possible causes remaining, view repair.
Repair
ACTION
→ Repair the SCI Transmit circuit for an open.
Perform POWERTRAIN VERIFICATION TEST VER - 1.
Replace and program the Powertrain Control Module in accor-
dance with the Service Information.
Perform POWERTRAIN VERIFICATION TEST VER - 1.
217
COMMUNICATION
Continued
APPLICABILITY
All
All