Chrysler Sebring 2004 Service Manual page 3314

P0725-ENGINE SPEED SENSOR CIRCUIT —
TEST
3 With the DRBIII , read Engine DTCs.
Are there any Engine DTC's present?
Yes → Refer to the Powertrain category and perform the appropriate
→ Go To 4
No
4 Using the schematics as a guide, inspect the wiring and connectors. Repair as
necessary. Pay particular attention to all power and ground circuits.
If there are no possible causes remaining, view repair.
Repair
5 The conditions necessary to set the DTC are not present at this time.
Using the schematics as a guide, inspect the wiring and connectors specific to this
circuit.
Wiggle the wiring and connectors while checking for shorted and open circuits.
With the DRBIII , check the EATX EVENT DATA to help identify the conditions in
which the DTC was set.
Were there any problems found?
Yes → Repair as necessary.
→ Test Complete.
No
ACTION
symptom.
Perform 41TE (NGC) TRANSMISSION VERIFICATION TEST -
VER 1.
Replace the Powertrain Control Module per the Service Informa-
tion. WITH THE DRBIII
REPROGRAM PINION FACTOR.
Perform 41TE (NGC) TRANSMISSION VERIFICATION TEST -
VER 1.
Perform 41TE (NGC) TRANSMISSION VERIFICATION TEST -
VER 1.
TRANSMISSION - NGC
Continued
PERFORM QUICK LEARN AND
207
APPLICABILITY
All
All
All