Wastegate Control Solenoid Valve - Subaru LEGACY 2006 Manual

asieps_tobira.book 33 ページ ２００９年１０月２６日 月曜日 午前９時１６分

Wastegate Control Solenoid Valve

FUEL INJECTION (FUEL SYSTEMS)
16.Wastegate Control Solenoid
Valve
A: REMOVAL
1) Remove the collector cover.
2) Disconnect the ground cable from battery.
IN-00203
3) Disconnect the connector from the wastegate
control solenoid valve (A).
4) Disconnect pressure hose (B) from the waste-
gate control solenoid valve.
5) Remove the wastegate control solenoid valve
from the bracket
(B)
(A)
FU-01192
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
6.5 N·m (0.66 kgf-m, 4.8 ft-lb)
FU(H4DOTC)-33