Wastegate Control Solenoid Valve - Subaru 2002 IMPREZA Service Manual

~
WASTEGATE CONTROL SOLENOID VALVE
FUEL INJECTION (FUEL SYSTEMS)
14.Wastegate Control Solenoid
Valve
A: REMOVAL
1) Disconnect the battery ground cable.
2) Remove the solenoid valve cover.
I
I
3) Disconnect the connector (A) from the waste-
gate control solenoid valve.
4) Disconnect the pressure hoses (B) from the
wastegate control solenoid valve.
I
5) Remove the wastegate control solenoid valve
from the bracket
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
6.4 N.m (0.65 kgf-m, 4.7 ff-lb)
/
EN0830
FU(D0HC TURBO)-41