15.Wastegate Control Solenoid
Valve
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the solenoid valve cover.
3) Disconnect the connector (A) from wastegate
control solenoid valve.
4) Disconnect the pressure hoses (B) from waste-
gate control solenoid valve.
(A)
WASTEGATE CONTROL SOLENOID VALVE
G6M0095
EN0828
EN0829
(B)
FU(TURBO)-43
FUEL INJECTION (FUEL SYSTEMS)
5) Remove the wastegate control solenoid valve
from bracket
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
EN0830
EN0830