Table of Contents
Advertisement
▶
Right turn signal lamp control
1.
When the BCM is received the multifunction right turn signal lamp switch signal, it operates the
right turn signal lamp and interior buzzer with the intervals of 400 ms ON/400 ms OFF for 75
times/min. When turning OFF the right turn signal switch during its operation, the turn signal
lamp and buzzer stop the operation.
2.
The turn signal lamps are operational only when IGN1 is ON.
3.
If the turn signal lamp is defective during its operation, the turn signal lamp blinks with the
intervals of 300 ms ON/300 ms OFF for 100/min and the interior buzzer sounds with same
4.
interval.
Defective conditions by BCM: Open - below load of 3.0 A, Short - over load of 7.0 A (load
5.
means lamp load here)
When turning ON the turn signal switch, the lamp blinks 3 times by the BCM. When turning OFF
6.
the switch during the operation, the turn signal lamp blinks 3 times and goes off.
When turning OFF and then immediately ON the turn signal switch during auto blinking
7.
operation of 3 times, the turn signal lamp blinks additional 3 times.
When turning ON the left turn signal switch during the right turn signal lamp operation, the right
turn signal lamp stops immediately and the left turn signal lamp starts blinking.
03-59
8710-01
Hide quick links:
Advertisement
Chapters
Table of Contents
