1. CAUTIONS WHEN WORKING ON ELECTRICAL UNITS
10 A
-
Disconnect
battery
electrical units.
Make sure to turn "OFF" the ignition switch
and other lamp switches before
disconnecting or connecting the negative
battery cable. (Otherwise, semiconductor
parts can be damaged.)
-
Do not drop or appy excessive impact to
sensors and relays.
80℃
-
If a fuse is blown, replace it with a fuse
which has the correct amperage rating. If
you use a fuse with higher capacity than
the specification, the component can be
damaged or catch fire.
15 A
8410-00
the negative cable from the
in
advance
when
working
02-3
on