SSANGYONG Korando 2012 Manual page 723

(4) Illumination Mode
▶ TRIP/RESET switch
- Press for less than 1 second: change to next mode
- Press for more than 1 second:
: Enter into illumination level mode
→ Level changes by 1 step up and down when pressing the switch for more than
1 second on consecutively illumination mode
(e.g. Level 4 → 5 → 6 → 5 → 4 → 3 → 2 → 1)
- If the Trip/Reset switch is not pressed within 3 seconds after getting into the illumination mode,
the LCD changes to next mode.
SVC class instrument cluster
(5) Ambient Air Temperature Mode
- The ambient air temperature is calculated and displayed.
- This is displayed on both STD and SVC class, regardless of FATC type (automatic or manual).
- For SVC class, the driver set only the unit between ℃ and ℉ on the DOT LCD, the ambient
temperature is displayed on the SEG LCD.
Function
Display type 3 digits LCD
Display range -
-30℃ ~ 90℃
(-22℉~ 194℉)
-
-31℃ ~ -33℃
: maintain 30℃
-
91℃~93℃
: maintain 90℃
Resolution
1℃(1℉)
<STD>
Signal
STD class instrument cluster
<SVC>
Remark
<STD>
05-41
8010-01
<SVC>