SSANGYONG Korando 2012 Manual page 291

14-6
▶ Excessive overload of CDPF (warning lamp illuminated)
1. If the vehicle is driven at a speed of 5 to 10
km/h for an extended period of time, the
soot accumulated in the CDPF cannot be
burned as the CDPF cannot reach the
regeneration temperature. Then, an
excessive amount of soot can be
accumulated in the CDPF.
2. This case is much worse than the simple
over-load of the CDPF. To inform this to
the driver, the engine warning lamp comes
on and the engine power is decreased to
protect the system.
3. To solve this problem, blow soot between
the engine and exhaust system several
times and erase the related DTC. Then,
check if the same DTC is regenerated
again. If so, check the DTC related to the
differential pressure sensor.