SSANGYONG Korando 2012 Manual page 599

03-42
▶ Lock/unlock control by SKM passive entry
1. The SKM searches for the verified smart key, sends door lock or unlock signal to the BCM
through the BCAN communication depending on the door status and sends the output for 0.5
seconds when operating the outside door handle switch with IGN OFF, ACC ON or IGN ON.
(The BCM does not perform door lock if the driver door is unlocked when receiving the outside
door handle switch signal with IGN ON.)
2. The BCM activates door lock output for 0.5 seconds if the driver door is unlocked after
receiving door lock/unlock command, BCAN signal (outside door handle signal), with IGN OFF
or ACC ON.