SSANGYONG Korando 2012 Manual page 433

09-10
▶ Jump start
If the battery is weak or terminated, the battery from another vehicle can be used with jumper
cables to start the engine.
▶ Connecting order
1. The positive (+) terminal of the discharged battery
2. The positive (+) terminal of the booster battery
3. The negative (-) terminal of the booster battery
4. Connect one end of the other jumper cable to the body of the discharged vehicle, such as the
engine block or a front towing hook.
Starting
▶
1. Prepare a set of jumper cables.
2. Place another vehicle that has the same 12 V of power near to the discharged vehicle.
3. Switch off all electrical accessories for the discharged vehicle.
4. Apply the parking brake and shift the transaxle to the P position (automatic transaxle) or neutral
(N) position (manual transaxle).
5. Connect the jumper cables.
6. Try to start the discharged vehicle while accelerating the engine rpm in the booster vehicle.
7. Attempt to start the engine with the discharged battery.
8. After starting the engine, carefully disconnect the jumper cables in the reverse sequence of
connection.