SSANGYONG Korando 2012 Manual page 285

2) Location and Components
E-EGR cooler and bypass valve
EGR cooler
The cooler lowers the high temperature of the
exhaust gas and the bypass valve directly
supplies the exhaust gas to the intake duct
without passing through the EGR cooler to
reduce the emission of exhaust gas before
warming up the engine.
EGR pipe
Transports the exhaust gas from the EGR
cooler and EGR bypass valve to the intake
duct.
EGR bypass
Used as a main map value to control the EGR.
The coolant temperature, engine rpm, engine
load, intake air temperature (HFM: decreased
at 60˚C or more), atmospheric pressure
(atmospheric pressure sensor: altitude
compensation) are used as auxiliary map
values.
Receives the electric signal from the ECU to
control the valve.
1793-01
HFM sensor
E-EGR valve
13-5