SSANGYONG Korando 2012 Manual page 571

03-14
▶ Rain sensor coupled wiper (LIN)
1. System layout
2. Data recognition & operation
- Data recognition time
The system performs LIN communication regardless of the conditions of wiper and light
switch when the ignition switch is in ON position. If the intermittent/automatic wiper switch is
in "AUTO" and the light switch is in "AUTO" position, the wiper system operates according to
the LIN data.
-
The data received from the rain sensor is recognized for 2 times consecutively.
Operation when recognizing data
No data: wiper low/high relay OFF
Low speed signal: low relay ON (ON for at least one cycle), but high relay OFF
High speed signal: high relay ON (ON for at least one cycle), but low relay OFF
The washer switch signal is overridden during continuous operation of the wiper.
(Washer coupled wiper function is available only during intermittent operation)