Table of Contents
Advertisement
(1) Wiper mist
1.
When the multifunction switch is pushed to the MIST position for 0.1 sec. or more with the
IGN1 ON, the wiper relay is turned on after 0.1 sec. has passed. When the wiper returns to the
park position, the wiper relay is turned off.
2.
When the MIST switch signal is input the wiper is operated at high speed. When the switch is
release from the MIST position, the wiper is operated at low speed.
08-13
7810-00
Hide quick links:
Advertisement
Chapters
Table of Contents
