Table of Contents
Advertisement
▶
Inspection
1.
Start the engine and turns on the headlamp, blower and heated wire at their full load. Then,
measure the maximum output current (MSM measurement value) when racing the engine to
2,700 rpm.
Specified value
The output current may not reach the limit value due to various parameters (high temperature or
electric load etc.). Thus, do not perform the inspection with fully charged battery.
2.
Turn the ignition OFF after inspection.
3.
Disconnect the negative cable from the battery and remove the testers (ammeter
and voltmeter).
▶
Characteristic curve (output from alternator)
60% of rated current (limit)
14-9
0000-00
Hide quick links:
Advertisement
Chapters
Table of Contents
