SSANGYONG Korando 2012 Manual page 378

02-32
▶ Assembling the piston
- Install the piston rings with the "X" mark on the ring facing upwards.
-
Position the end gap of #1 ring at 180˚ away from the end gap of #2 ring.
-
Position the end gap of oil ring at 180˚ away from the end gap of coil spring, and position the
end gap of oil ring at 90˚ away from the end gap of #2 ring.
Top surface of piston
Assembly mark
Top surface of cylinder block
#1 cylinder