SSANGYONG Korando 2012 Manual page 665

*- Except brake switch signal input
For the vehicles with A/T, when the START switch is pressed for 10 sec. or more, the
ignition status is changed to IGN ON and the engine start request signal is sent regardless
of the brake signal, provided that the initial ignition status is ACC ON and the gear selector
lever is in P or N position.
(4) Engine stop
1. When the START button is pressed at the vehicle speed of 3 km/h or less, the SKM turns off
the IGN relay to stop the engine.
2. When the vehicle speed is 3 km/h or more or no speed signal is input, the SKM performs the
following functions:
- When the START switch is pressed for 3 sec. or more at more than 3 km/h, the ignition
status is changed from IGN to ACC.
If the switch is pressed again, the ignition status is changed from ACC to IGN.
- When the START switch is pressed for 3 sec. or more with no vehicle speed signal (CAN
signal timeout, abnormal signal), the ignition status is changed from IGN to ACC. If the
switch is pressed again, the ignition status is changed from ACC to OFF.
3. When the START button is pressed and held with IGN ON, the ignition status is changed to
OFF. When the START button is pressed briefly, the ignition status is changed to ACC ON.
(5) ACC ON/Power OFF
The SKM changes the ignition status to OFF from ACC ON when:
1. the engine START/STOP button is pressed with the brake pedal released after the ignition
status is changed from IGN ON to ACC ON.
2. the REKES LOCK or passive LOCK is operated with ACC ON.
3. the BCM sends the driver's door open signal.
4. 12 minutes have passed with ACC ON.
04-23
8712-03