Table of Contents
Advertisement
03-10
1) Wiper Control
(1) Wiper mist & front washer coupled wiper
Wiper mist
▶
1.
When the multi-function switch is rotated for more than 0.1 second to activate the mist
mode with IGN1 ON, the wiper relay is activated after 0.1 second. It will be deactivated when
the wiper motor is in the parking position.
2.
While the wiper operates at high speed when the mist switch signal is received, it operates at
low speed if the switch is returned to its starting position.
▶
Front washer coupled wiper
1.
When holding the front washer switch at ON position for more than 0.6 seconds with IGN ON,
the wiper relay is activated 0.5 seconds after. The wiper stops after three more wipes since
that the washer switch is turned to "OFF" position.
Hide quick links:
Advertisement
Chapters
Table of Contents
