(6) Low Pressure System Pressure Test
▶
Inspection procedure
3.
Disconnect the key connector for fuel filter connection, and connect both connectors to the
fuel filter and hose.
4.
Start the engine and check visually for clogged low pressure fuel system, excessive air or air
entry.
5.
If the fuel flow is not sufficient or air is in the fuel, repair the leak area.
1.
All wirings/connectors and fuel lines should
be connected and the engine should work
properly.
2.
Prepare a special tool for low pressure test
and clean it thoroughly to prevent foreign
materials from entering.
03-15
0000-00