SSANGYONG Korando 2012 Manual page 732

05-50
5. SELF DIAGNOSIS
1. Self diagnosis for gauge
- Speedometer: Check the whole speed range (minimum to maximum).
- Tachometer: Check the whole rpm range (minimum to maximum).
2. Self diagnosis for symbols
- All symbols ON
(except the wired type symbols: air bag, passenger air bag, turn signal indicators, hazard
warning lamp, high beam, front fog lamp)
3. ETC
- When entering into the self diagnosis mode, the instrument cluster illumination output will be
100%.
- All the remaining segments are ON.
- The spanner symbol goes off if CAN messages to the instrument cluster are OK. If not, it
blinks.
- The mode and illumination switch inputs are overridden.
4. Diagnosis mode deactivation condition
- The diagnosis mode is deactivated when the ignition switch is turned to "OFF" position or the
engine is running.
6. VARIANT CODING
- The instrument cluster enables all functions by receiving the vehicle's variant codes through
CAN communication when turning the ignition switch to ON position.
- The systems verified by variant code performs the pre-warning and time-out operation. If not
confirmed, all data for the systems, even exiting in CAN network, are overridden.