SSANGYONG Korando 2012 Manual page 851

01-20
8. STEERING SYSTEM LAYOUT
1) HPS (Hydraulic Power Steering)
The hydraulic pump is a vane
type pump and consists of
the flow control valve and
pressure relief valve.
Hydraulic pipe & hose
Steering gear box assembly
Steering cylinder
Tie rod end
The steering gear box assembly consists of power cylinder and control valve. The power cylinder
has a cylinder, piston and piston rod. The control valve directs the oil to one end face of the
piston to enhance the steering force. There is a safety check valve which lets the driver steer
manually when there is a malfunction in the hydraulic circuit.
The oil reservoir sends the oil
to the power steering pump
and receives the oil from the
power steering gear.
Steering wheel
assembly
Hydraulic pipe
There is a shock absorber
which is folded in the axial
direction when the vehicle is
crashed and a ignition switch
assembly on the column shaft.
Column shaft
Lower shaft
The lower shaft minimizes the
torque change using a CV joint
which has constant angular
speed.
Gear box
Tie rod end