SSANGYONG Korando 2012 Manual page 573

03-16
▶ Washer coupled wiper in rain sensing mode
1. When the washer switch signal is received during intermittent operation coupled with rain
sensor with IGN ON and intermittent/automatic washer switch operation, the wipers operate in
washer coupled mode regardless of the communication with the rain sensor. However, if the
washer switch signal is received the washer relay is activated and wiper relay remains
activated, when the data coupled with rain sensor indicates continuous wiper operation.
2. Even though the wiping system is in washer coupled wiper mode, the operating data are sent
to rain sensor.
Sensitivity adjustment (instant wiping)
▶
1. When the wiping speed control switch is turned to "FAST" with IGN2 ON, intermittent/automatic
wiper switch in "ON" position and wiper motor stop (parking position), the wiper motor
operates one cycle at low speed.
(only when the rain sensor detects raindrops)
* If the wiping speed control switch is changed more than 2 stages within 2 seconds, the wiper
motor operates only one cycle.