SSANGYONG Korando 2012 Manual page 669

Hide thumbs Also See for Korando 2012:
Table of Contents

Advertisement

8) SKM Warning Control
(1) Smart key not found warning (Key out warning)
If no verified smart key is identified as being in the vehicle with IGN ON or ACC ON, the SKM
sends the signal, which identifies that there is no verified key inside the vehicle, to the BCM and
instrument cluster through the BCAN (Smart key not found warning). This warning continues for
up to 10 sec. until the warning condition is deactivated.
The SKM stops the warning immediately after the warning condition is deactivated.
Smart key not found warning with ACC ON
-
Initial condition:
<ACC ON> & <Doors open except driver's door> & <Tailgate open> & <Smart key out>
-
Operation by driver
Doors: <Doors open except driver's door> & <Tailgate open>→ <All doors closed> &
<Tailgate closed>
-
SKM operation
1.
The SKM starts to identify a smart key by using the interior antenna after confirming that all
the doors are closed through CAN communication.
2.
If no smart key is found it sends the signal for [Smart key not found warning].
* No cyclic smart key searching after transmission
3.
If a smart key is found, no operation is performed.
- Smart key not found warning deactivation conditions
If below conditions are met, the SKM sends the signal for [Smart key not found warning]
to deactivate the warning.
: <ACC off> OR <IGN1 on> OR <Smart key in>
Smart key not found warning with IGN/ENGINE ON
-
Initial condition:
<IGN1 ON> & <Door open> & <Tailgate open> & <Smart key out>
-
Operation by driver
Door: <Door open> & <Tailgate open> → <All doors closed> & <Tailgate closed>
-
SKM operation
1.
The SKM starts to identify a smart key by using the interior antenna if the [Smart key not
found warning] signal is not output.
a. If no smart key is found it sends the signal for [Smart key not found warning].
b. If a smart key is found, no operation is performed.
2.
The SKM searches for a smart key inside the vehicle at 3 sec. intervals while the [Smart key
not found warning] signal is output.
a. If no smart key is found it sends the signal for [Smart key not found warning].
b. If a smart key is found it sends the signal for [Smart key not found warning
deactivation] signal to deactivate the key out warning.
04-27
8712-03

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents