SSANGYONG Korando 2012 Manual page 706

05-24
4) Display Sequence
▶ Display sequence for STD main LCD & SVC DOT LCD
Operating time of Trip
switch
Below 1 second
(60 to 980 ms)
Over 1 seconds
Over 3 seconds - Ready
* If the Trip/Reset switch is not pressed within 3 seconds after getting into the illumination mode
and the ambient air temperature mode, the LCD changes to next mode.
* The factory-setting mode is DTE (Distance To Empty) mode.
STD Mode change
(ODO → TRIP A → TRIP B → DTE → AFC → IFC →
ILLUMINATION → OUT TEMP)
SVC Mode change
(TRIP A → TRIP B → DTE → AFC → IFC →
ILLUMINATION → OUT TEMP)
Reset function (Trip A, B, AFC)
(Illumination (6 to 1 level), unit of outside temperature (℃ ↔ ℉))
Mode change
(Illumination → OUT TEMP → ODO)
Function