Table of Contents
Advertisement
▶
Auto door lock control
1.
Door lock output is activated when the vehicle speed is maintained above 30 km/h with IGN1
ON. However, if all the doors are locked or fail, lock output is not activated.
2.
If any of doors is not locked after Step (1), BCM activates the door lock output up to 5 times.
3.
If the door is still unlocked, BCM considers the door as Fail.
4.
If the failed door is changed from UNLOCK to LOCK, the fail record the side fascia panel.
5.
If there is any failed door, the auto door lock function is not available.
(Even though the vehicle speed is increased over 30 km/h again after decreased below 30
km/h, BCM does not send the auto door lock signal.)
6.
When receiving the unlock signal for another door during Step (2), BCM sends the lock
signal for the door up to 5 times.
7.
The unlock output is activated automatically when door lock output conditions are met by this
function or the IGN1 switch is turned to OFF from ON position (even though the lock output is
not activated if the vehicle speed is maintained above 30 km/h under lock condition). (If the
LOCK condition is established with the ignition switch ON, the system outputs UNLOCK signal
unconditionally when turning the ignition switch to OFF position.)
8.
However, whether the door lock output condition is met or not is initialized when the IGN1
switch is turned to OFF position.
9.
When turning the ignition off, the fail record for a door will be initialized.
If any of door lock switches is in LOCK position when turning the ignition off, all doors are
unlocked.
(*1) Lock: All doors including tailgate are locked.
Unlock: All doors including tailgate are unlocked.
03-43
8710-01
Hide quick links:
Advertisement
Chapters
Table of Contents
