SSANGYONG Korando 2012 Manual page 1022

15-8
The front sub frame consists of 4 body bush mountings(A) and 2 engine bush mountings(B)
which reduce the vibration from the powertrain and road, and also control the torque. And the two
engine bush mountings consist of an engine mounting which supports the engine powertrain and
a transmission mounting.
The engine side and transmission side mountings are rubber mountings with brackets and
insulators while the body mounting is a rubber bush mounting which is fitted to the frame.
Installation of front sub
frame (4WD)
Installation of front sub
frame (2WD)
The installation of the front sub frame is the same for both automatic
transmission and manual transmission. For 4WD, the PTU and the
propeller shaft are installed.
PTU assembly
The installation of the front sub frame is the same for both automatic
transmission and manual transmission.